| Aquatreat 202 Is A One Shot Product For Treatment Of Large Cooling Water Systems, Containing All The Necessary Ingredients For A Good And Economical Treatment Against Corrosion, Scaling And Microbiological Fouling.
Aquatreat 202 Is A Very Good Dispersant For All Inorganic Scales Like Calcium Carbonate, Calcium Sulphate, Calcium Phosphate And Iron Oxide Or A Combination Of These. This Dispersing Action Comes From The Unique Combination Of Three Polymers; A Modified Polyacrcylate, A Sulphonated Terpolymer And A Polyethoxylated, Aromatic Polymer. As Corrosion Inhibitors, Aquatreat 202 Contains An Aminotrismet hylenephosphonate That Will Slowly Hydrolyse To Polyphosphate And To Orthophosphate And Giving As Well A Cathodic And An Anodic Inhibition Against Corrosion; On The Other Hand There Is An Organic Corrosion Inhibitor For Alloys Based On Copper, Aluminium And Zinc.
By Dosing Aquatreat 202 to a Cooling Water, The Dispersing Action Is So Important That in Many Cases There Is No Need for a Biocide, But If Microbiological Growth Is Important and a Risk of Bio film Formation Or Organic Fouling Is Present, One May Consider The Use Of A Biocide.
As Biocide In Most Circumstances The Most Efficient And Most Economical Biocide Is Chlorine, Chlorodioxide Or Bleach (Sodium Hypochlorite), The Excess Needed Is Not More Than 0.2 Ppm Free Chlorine Measured In The Cooling Water That Flows To The Plant From The Cooling Tower. Aquatreat 202 Contains A Catalyst That Decreases The Need For Free Chlorine And Makes The Free Chlorine Work In The Biomass. This Mechanism Is Studied By Our Research In The Lab And Confirmed In More Than 100 Cooling Water Systems Treated Like This.
Aquatreat 202 Contains 80 % Of Dry And Active Material; And Is By Far The Most Concentrated Product Of Its Kind, We Have More Than 30 Years Of Experience With This Technology. Dosage Of The Product Should Be 75 Ppm In The Recirculation Water For An Optimum Result, Depending On Circumstances; This Dosage Can Be Reduced To 20 Ppm In The Recirculation Water. In The Case Of Severe Fouling, Process Leakages, Cleaning Operation To Be Done After A Lack Of Treatment Or Other Situations That Created Deposits, The Dosage Can Be Increased To 10 Times The Normal Dosage For Fast Cleaning During A Few Days To A Few Weeks.
Aquatreat 202 Is A Non Dangerous Product, Does Not Need Any Special Safety or Handling Precautions and Will Not Influence the Biological Or fysico-Chemical Waste Water Treatment. Also There Is No Need For Ph Control Of The Treated Water, Aquatreat 202 Works In A Ph Range Of 2-12. We Have Hundreds Of References With This Product In All Different Kind Of Industries, In All Different Operating Circumstances And More Than 30 Years Of Experience.
With Aquatreat 202 You Will Be Able To Control Corrosion AND Avoid The Formation Of Deposits (Inorganic And Other) And The Formation Of Bio film (Legionella!) And There Will Be No Need Of Any Dangerous Acid (Dangerous For Human And System!), You Will Work With Free Ph! An Over dosage Of Aquatreat 202 Is Not Dangerous At All, It Will Clean You System without Any Danger!!
Aquatreat 415 Is Very Well Known Biocide Used In Recirculation Cooling Water, Aquatreat 415 Is A Liquid Broad-Spectrum Micro Biocide, Especially Developed For Bacteriological Control Of Industrial Cooling-Water Systems. Aquatreat 415 Is A Non-Oxidising Biocide And Is Also Not Corrosive On Materials. | 
